Spread out the clothes comprehensively and check if all parts are ironed smoothly
Check if the washing label at the neckline position is complete, without damage or detachment (usually 2 labels)
Check if the collar is intact, without damage or missing fabric
Check if the buttons are all present, if there are scratches or damages on the buttons, and if there are spare buttons on each piece of clothing (the shirt is at the hem and the polo shirt is at the side), the buttons should be slightly pulled down to see if they will come off
Check the pocket and ensure that the stitches are neat and the pocket is not crooked. For those with two pockets, please note that the left and right pockets must be flush
Check if there are excessive wrinkles at the back neckline
Check if the trademark is complete, usually one sleeve at the chest. Pay attention to whether the trademark position and direction on the sleeve are correct
Check if there is a reverse wheel on the left and right sleeves
Thoroughly inspect the stitching of the entire garment to ensure there are no skipped stitches, broken threads, or loose threads. All thread ends should be trimmed clean, especially the buttons and the inside of the hem
Thoroughly check the integrity of the entire garment, without any dirt, holes, runs, uneven dyeing, or white spots
The length of the shirt front hem should be consistent. The hem of the Polo shirt should be symmetrical on the left and right sides
The packaging quantity for each small package is 6 pieces, and the quantity for each small package must be checked again after inspection
When packing cardboard boxes, it is necessary to add gaskets on top and bottom to cover large bags. Shirts should use a 60 * 40 * 25cm box gauge, while Polo shirts and sweaters should use a 60 * 40 * 35cm box gauge. In principle, it should be possible to pack as much as possible without being empty
If any defective products are encountered during the quality inspection process, they should be sorted out first and not repaired. After all quality inspections are completed, the quantity depends on the quantity. We can repair the single digit ones ourselves. If the number exceeds the single digit ones, we will return them to the factory for processing. If there are holes, uneven dyeing of the yarn, and exposed white, the corresponding number of problem points that cannot be repaired should be directly counted, and the washing label on the collar should be cut off and placed in the defective box. The quantity should also be counted for those returned to the factory for processing
The corresponding weight of each Polo shirt number is as follows: M-214g, L-228g, XL-235g, 2XL-252g, ± 10g, which belongs to the normal range. During quality inspection, sampling and weighing should be carried out from time to time
The shoe upper is scratched or damaged. (For example, genuine leather: the toe cap, shoe cover, and outer waist should not have defects in the leather material, such as insect spots, scratches, and numbness spots.). Is the velvet material fading and is it paired with a pair
The upper surface should not be uneven, wrinkled, or pitted. The toe of the shoe must be smooth and not curled
The upper surface should not have floating or broken threads, nor should it have no bottom thread or skipped stitches
Is the shoe toe warpage comparison consistent and correct compared to the actual sample
Compare the color difference of the sample shoe's upper, and check if the brightness and color wiping effect are the same as the actual sample
Check whether the trademark letter category is correct and the necessary letters
The inner part of the shoe toe should not be folded
The shoe should not be uneven or wrinkled, the zipper should be smooth, and the lock should be in one place
The shape of the arched instep must be standard and not sunken
Whether the zipper is smooth, whether it stops slipping, whether it has sufficient fastness, and whether the trademark is correct
Check whether the inner lining of the boot is smooth and whether the stitching on the inner lining is in place
Is the boot barrel tilted forward or backward
Whether the hook and fur adhesion of shoes with magic bands meet the standards
2nd Floor, No. 427 Xinxing Street, Xingban Community, Xintang Street, Jinjiang City, Quanzhou City, Fujian Province
+86-139-5995-8278
+86-139-5995-8278
+86-595-8596-8868
+86-139-5995-8278
English